21/12/2021 · Alliance 2695 ANSWER It depends on the vial used. Refer to the Aijiren Technology Sample Vials and Accessories Brochure. Also see: What does "residual volume" mean when referring to autosampler vials? ADDITIONAL INFORMATION For example, if using the standard 2-mL flat-bottom vial, the residual volume of this vial for an Alliance 2695 is 750 uL.
Aijiren Technology Certified Sample Vials Built for chemistry confidence. Maximize your lab efficiency with fewer failed assays and limited instrument downtime caused by vials out of specification. You can choose from Aijiren Technology broad range of vials, each one is held to tight dimensional tolerances and the certified products have cleanliness measured by LC and MS
Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Amber glass vials are available in 2-60 ml volume with a screw top. Inserts work in conjunction with any autosampler and fit either standard or wide openings vials.
Aijiren Technology Alliance Total Recovery Vial Specifically designed for the side draw-port needle and the factory needle draw depth settings of the Aijiren Technology Alliance 2690/2695 HPLC. This vial delivers maximum sample capacity (~1 mL) with minimum residual volume (~9 μL). Aijiren Technology Maximum Recovery Vial Specifically designed for the bottom draw-port
Reduce failed assays with Aijiren Technology glass and plastic autosampler vials and high sample recovery vials - certified/tested by HPLC, GC, and MS.
Reduce failed assays with Aijiren Technology glass and plastic autosampler vials and high sample recovery vials - certified/tested by HPLC, GC, and MS.
Aijiren Technology Sample Vials and Accessories. Aijiren Technology Autosampler Vials, Plates, and Seals for Use with Alliance HPLC Systems . Settings for Alliance HPLC Vials and Low Volume Inserts (LVI) . Aijiren Technology CERTIFIED SAMPLE VIALS - HPLC eShop. All Aijiren Technology glass vials are made from USP Type I Glass. Glasses in Crimp Caps squeeze the septum between the rim of the
21/12/2021 · FIX or WORKAROUND. You can offset the depth of the needle in the vial to compensate for when you use low-volume inserts in the sample vials. From the front panel of the 2695, select Diag > Service Utilities > Custom Offset and enter the value listed in Table B-4 of the 2695 Separations Module Operator's Guide .
When used with the Andrew+ pipetting robot, one can carry out the liquid handling and the sample extraction, providing complete walk-away sample preparation. Key features of the Andrew+ Pipetting robot combined with the Extraction+ connected device include compatibility with both plates and cartridges, flow through waste collection, full vacuum control of the protocols, and, most importantly
Aijiren Technology Alliance Total Recovery Vial Specifically designed for the side draw-port needle and the factory needle draw depth settings of the Aijiren Technology Alliance 2690/2695 HPLC. This vial delivers maximum sample capacity (~1 mL) with minimum residual volume (~9 μL). Aijiren Technology Maximum Recovery Vial
Quality vials are essential for reliable analytical results. All Aijiren Technology Certified Vials are tested by LC or LC/MS to assure quality and cleanliness. The test results confirm the vials, cap and septa have been properly manufactured, handled and packaged, and are free from any potential contaminants which could result in chromatographic ghost peaks.
Aijiren Technology Alliance Total Recovery Vial Specifically designed for the side draw-port needle and the factory needle draw depth settings of the Aijiren Technology Alliance 2690/2695 HPLC. This vial delivers maximum sample capacity (~1 mL) with minimum residual volume (~9 μL). Aijiren Technology Maximum Recovery Vial Specifically designed for the bottom draw-port
Caps & Vials Designed for Aijiren Technology Alliance HPLC Auto-Samplers CRIMP CAP VIALS 4 Crimp Cap Vials, 12x32mm Part N o. Description Quantity-100 Cronus ® Crimp Vial, 1.8ml, Clear Glass ack-100 Cronus ® Crimp Vial, 1.8ml, Amber Glass ack-100 Champagne Vial, 1.5ml, Clear Glass ack-100 Champagne Vial, 1.5ml ack Get price + Chat Now +
Sample Vials and Accessories - Aijiren Technology Corporation. Specifically designed for the bottom draw-port needle of the Aijiren Technology ACQUITY UPLC and Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap makes it ideal for use with Aijiren HPLC and GC Systems.
Wide selection of vials, including HPLC Certified vials (tested by HPLC for cleanliness) and LCMS Certified vials (tested for total ion count and presence of clusters in the high mass range).