Aijiren Tech Scientific is dedicated to improving the human condition through systems, consumables, and services for researchers.
D I V I S I O N O F E N V I R O N M E N TA L H E A LT H vial. If you are sampling from more than one sample site, repeat steps three.
Autosampler Vials 2mL, HPLC/GC Sample Vials, with Writing Area and Graduations, 9-425 Screw Cap, Blue PTFE & White Silicone Pre-Slit Septa,
100 ul Aluminum Sample Pans for th TGA Q500. These samples pans are also suitable for use with the TGA-HP and VTI-SA Sorption Analyzers.
This Lab Services Starter Pack is designed to eliminate the guesswork when preparing a sample for shipment. Our Starter Pack provides you with enough vials and
Our range of products include active, passive and whole air sampling devices; Tenax TA, glass TD tube, fritted, O.D. × I.D. × L 6 mm × 4 mm × 4.5 in., ...
Aijiren Technology Certified Sample Vials. Built for chemistry confidence. Maximize your lab efficiency with fewer failed assays and limited instrument downtime caused
Vacuum Control Range (1 to 25 “Hg) for effective sample degassing and cell cleaning; Vacuum chamber for degassing sample in vials/tubes or a single 96-well
Mar 15, 2022 How to select the right sample vials. Did you know that one of the most common tech support calls at Aijiren Tech is related to sample ...
2ml Autosample vials. 2mL 9-425 Autosampler Vial. Top Type 9-425 Screw Cap 9-425 Screw Cap 9-425 Screw Cap. Color Amber Amber Amber.
The results demonstrated that over a period of 47 d, TA values from seawater samples stored in polypropylene (PP) bottles and high density polyethylene (HDPE)
Tenax TA is a porous polymer resin based on 2,6-diphenylene-oxide. from high moisture content samples due to its low breakthrough volume for water.
For sampling purposes, you can order sample containers and equipment from ALS Scandinavia. For samples intended to be sent for ALS for analysis,
The headspace containing the derivatives (R 2 Hg and R 4 Sn) was pumped through the Tenax-TA trap. Forty strokes of the plunger at a flow rate of 100 mL s À1
Blood collection tubes should be drawn in a specific order to avoid cross- contamination of additives (10,11). (also see Chapter 12). As shown in Table 3.1,