Vial Micro Insert, Clear Glass, 300µL, 6mm diameter with 12mm taper | 100 pack PLINIUS N30-1 / N45-1 / N60-1 Lab Nitrogen Generators for LC-MS/MS from CLAIND.
Not less than 250 micro-liter and injection volume will be 10 micro-liter. Cite. Dr Jannathulla R. Otherwise use vial insert which had the capacity of 10-100 ul. Cite. Navid Jubaer.
Snap Ring 11mm Clear Plastic 0.3mL HPLC Autosampler Vials w/ Micro-Insert - 100/pk, CV2038 - Bundle 0.3mL Clear, Polypropylene, Snap Ring Micro-Vial, 11.6x32mm, 100/pk, CV2038 From $9.42 Regular Price $10.83
Mass Spectrometry Vials. Our certified, low adsorption (LA), LC/MS vials and kits are designed to reduce surface activity while improving analytical quantitation. The QSertVial™ microsampling device contains a fused, 300 μL glass insert and is compatible with most autosamplers. Our certified center drain (CD) vials and kits feature a unique
Amber glass, 8 mm plug for Aijiren Technology/Shimadzu no inner barrier for micro-insert 548-0449 Clear glass Other Characteristics: • Handy and inexpensive vial and closure combination for non critical analysis in HPLC. • Micro-insert can be fixed in PE • Star-shaped. WICOM - HPLC and GC-Accessories. WICOM 11mm crimp vials, clear, 2ml, with write-on
HPLC Vials Micro-Inserts, hplc vial inserts, insert vial 1-4mL Autosampler Vials for HPLC, UPLC, GC 1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro-Inserts Vial Racks Hand Crimper
Vials, 200µL TPX Vial w/ Glass Micro Insert, 12 x 32mm, 9mm opening, 100/pk. Vials, 200uL Glass Insert Only, 100/pk LC/HPLC; LC-MS; Life Science; Optical ...
Micro inserts are placed and sealed inside a vial so they can be used in conventional autosampler racks. The smaller 6 mm diameter of the insert gives better sample recovery than a routine flat based vial; with conical inserts being most effective with residual volumes of 1-2 microliters.
Brand new gc vial caps with inserts for liquid autosampler. 100PCS 9-425 Lab 2ml Auto-sampler Vials w/ Screw Caps. 100pcs/pk 2ml Autosampler Vial+Cap 9-425 Screw Thread Finish HPLC GC Lab Bottle. 2ML Sample Vials + Caps Clear Aer Glass Bottle Vial 8-425 Screw Top Lab. AU $30.45.
Micro-Inserts. Micro-Inserts are made of 1st hydrolytic class, clear glass and are available with a flat bottom or conical bottom. The conical bottom inserts are available with or without bottom spring. Bottom springs help keep the insert centered in the vial. Polypropylene inserts are also available.
Connect the Aijiren LC system with column (ZORBAX Rx-SIL 5 μm, 4.6 x 250 mm, normal phase) and solvents, and equilibrate with Solvent A, at flow rate 1 ml/min for 60 min. Set up OpenLab CDS EZChrom program: flow rate 1 ml/min, injection volume 5 μl, linear gradient for 14 min (Solvent A 100%~0, and Solvent B 0~100%), and fluorescence detection (λ excitation 470 nm, λ emission
Chromatography Vials, Caps & Septa. Autosampler Vials for HPLC & GC. Aijiren's autosampler vials are available as either snap, screw or crimp in style. Most users will be familiar with the main 2 mL vial being the HPLC vial or LC/MS vial; sometimes being referred to as a 1.5 mL vial.
High-recovery vials enable sample concentration and injection without transferring to microvolume inserts. Micro-sampling vials offer a lower cost alternative to high-recovery vials. Conical inserts with polymer feet virtually eliminate dead volume and act as a shock absorber for needles.
Aijiren Techbrand™ Micro-Insert, Clear Glass, for small opening vial Small opening vials require Inserts with 5mm diameter. Promotions are available
Vial Insert Size : 6*29mm. Insert Volume : The Maximum Volume is 200ul ,Standard Volume is 100ul. Glass Insert Material : USP Type 1, 68 Borosilicate Expansion, Clear Glass. Polyspring glass hplc vial Insert : Polyspring can protect vial's bottom and insert. Application: Insert Tube for 9-425 Vials,11mm Crimp Top Vial and 11mm Snap Top Vial.